Unique nourishing conditioner for a silky smooth coat
Do you expect that little extra from your coat care products? We understand. The Show Tech+ Blossom & Bloom Nourishing Conditioner revives any long coat and creates a never-before-seen result. Using this intensely nourishing conditioner with botanical ingredients gives the coat an immense boost.
Glossy and silky soft like never before!
The extraordinary Blossom & Bloom brings a breath of fresh air to the world of coat care. Its rich, creamy formula contains 100% natural shea butter. Shea butter is extracted from the nuts of the shea tree and is high in fatty acids and vitamins (A and E). What makes this butter so special are its nourishing and protective properties.
For show dogs, Blossom & Bloom is the best conditioner! This instantly nourishing conditioner is indispensable to their grooming routine. The formula with lanolin, wheat proteins and shea butter penetrates deep into the hair shaft, creates an optimal moisture balance in the hair and provides a smooth, silky finish.
Because Blossom & Bloom conditions hair from root to tip, it is also the ideal treatment for dry or frizzy hair and split ends. It improves the coat structure and tames rebellious hair or unruly strands. The hair is intensely moisturised, optimally protected and repaired from within. It will look healthy, shiny and frizz-free again and feel silky and supple!
Has the coat been damaged by styling tools, hormonal changes, heat, pollution or other factors? Blossom & Bloom revives dry or damaged hair and gives it back its lustre.
Let yourself be seduced by its deliciously exotic and original perfume based on oud, musk and vanilla. Its warm, sweet and invigorating notes create a fine and relaxed feeling and leave a unique scent on the hair.
It's all in the details
A dog's coat can easily hold a lot of water. Therefore, it is important to use an absorbent towel that helps you to dry the coat quickly. The Show Tech+ Dry Mate will be your best friend from now on!
It’s all in the details
Looking for the perfect styling hair spray to gain back control of your pet’s coat and create not only texture and body but also volume and shape, or want to create amazing top knots? Meet the amazing Show Tech+ Evolution Hair Spray!
It’s all in the details
Show Tech+ Flex Groom Slicker brushes are specially designed to make brushing a lot easier, faster and painless for you and your pet. They are also really indispensable if you want to keep your pet’s coat healthy and natural!
Thanks to the ergonomic, comfortable handle made from non-slip rubber and the flexible head, the brush head will follow the shape of your pet’s body. Therefore, a minimum of stress on hand and wrist is guaranteed and repetitive strain injuries are prevented. Another important feature is that this brush can be used on both sides, which makes it perfect for both left- and right-handed groomers. The brush pins ensure a good grip on the coat and loose and dead hair is collected in the brush pad.
Time to say goodbye to mats, fur flying around and painful wrists!
Use instructions
Daily coat maintenance for bigger breeds with soft and fine coats and larger brushing areas.
For small to medium-sized breeds or smaller brushing areas, we recommend the Show Tech+ Flex Groom Professional Slicker Single Soft.
Gently brush and pull the brush towards the handle (don’t twist your wrist). Let the pins glide through the hair and repeat if necessary. Brush without putting downwards pressure on the skin.
Long coats- Gently brush with a light, long stroke, brushing beyond the ends of the hair tip to avoid static and breakage. For the best result, brush the hair in layers. Start at the bottom by parting the coat horizontally and holding the unbrushed part up with your free hand. Work methodically upwards, keeping your wrist straight to avoid contact with the dog’s skin.
Curly coats- Brush in the direction of the coat growth and then against it using light, long strokes.
Wiry coats- Brush in the direction of the coat growth, then against it if necessary to remove mats and dead hair. If the coat is matted, use the Flex Groom Professional Slicker brush in combination with the Show Tech Mat Buster Dematting Comb.
For dematting- Gently put the brush pins on the mat with a tapping movement and tease a few hairs from the mat by pulling the brush towards you and thus removing the pins away from the coat. Repeat until the mat is gone. To prevent mats and tangles, the dog’s coat should be regularly bathed, treated with a conditioner and brushed daily.
Show Tech+ Flex Groom Slicker brushes are specially designed to make brushing a lot easier, faster and painless for you and your pet. They are also really indispensable if you want to keep your pet’s coat healthy and natural!
Thanks to the ergonomic, comfortable handle made from non-slip rubber and the flexible head, the brush head will follow the shape of your pet’s body. Therefore, a minimum of stress on hand and wrist is guaranteed and repetitive strain injuries are prevented. Another important feature is that this brush can be used on both sides, which makes it perfect for both left- and right-handed groomers. The brush pins ensure a good grip on the coat and loose and dead hair is collected in the brush pad.
Time to say goodbye to mats, fur flying around and painful wrists!
Use instructions
Daily coat maintenance for bigger breeds with soft and fine coats and larger brushing areas.
For small to medium-sized breeds or smaller brushing areas, we recommend the Show Tech+ Flex Groom Professional Slicker Single Soft.
Gently brush and pull the brush towards the handle (don’t twist your wrist). Let the pins glide through the hair and repeat if necessary. Brush without putting downwards pressure on the skin.
Long coats- Gently brush with a light, long stroke, brushing beyond the ends of the hair tip to avoid static and breakage. For the best result, brush the hair in layers. Start at the bottom by parting the coat horizontally and holding the unbrushed part up with your free hand. Work methodically upwards, keeping your wrist straight to avoid contact with the dog’s skin.
Curly coats- Brush in the direction of the coat growth and then against it using light, long strokes.
Wiry coats- Brush in the direction of the coat growth, then against it if necessary to remove mats and dead hair. If the coat is matted, use the Flex Groom Professional Slicker brush in combination with the Show Tech Mat Buster Dematting Comb.
For dematting- Gently put the brush pins on the mat with a tapping movement and tease a few hairs from the mat by pulling the brush towards you and thus removing the pins away from the coat. Repeat until the mat is gone. To prevent mats and tangles, the dog’s coat should be regularly bathed, treated with a conditioner and brushed daily.
Show Tech+ Flex Groom Slicker brushes are specially designed to make brushing a lot easier, faster and painless for you and your pet. They are also really indispensable if you want to keep your pet’s coat healthy and natural!
Thanks to the ergonomic, comfortable handle made from non-slip rubber and the flexible head, the brush head will follow the shape of your pet’s body. Therefore, a minimum of stress on hand and wrist is guaranteed and repetitive strain injuries are prevented. Another important feature is that this brush can be used on both sides, which makes it perfect for both left- and right-handed groomers. The brush pins ensure a good grip on the coat and loose and dead hair is collected in the brush pad.
Time to say goodbye to mats, fur flying around and painful wrists!
Use instructions
Daily coat maintenance for bigger breeds with soft and fine coats and larger brushing areas.
For small to medium-sized breeds or smaller brushing areas, we recommend the Show Tech+ Flex Groom Professional Slicker Single Soft.
Gently brush and pull the brush towards the handle (don’t twist your wrist). Let the pins glide through the hair and repeat if necessary. Brush without putting downwards pressure on the skin.
Long coats- Gently brush with a light, long stroke, brushing beyond the ends of the hair tip to avoid static and breakage. For the best result, brush the hair in layers. Start at the bottom by parting the coat horizontally and holding the unbrushed part up with your free hand. Work methodically upwards, keeping your wrist straight to avoid contact with the dog’s skin.
Curly coats- Brush in the direction of the coat growth and then against it using light, long strokes.
Wiry coats- Brush in the direction of the coat growth, then against it if necessary to remove mats and dead hair. If the coat is matted, use the Flex Groom Professional Slicker brush in combination with the Show Tech Mat Buster Dematting Comb.
For dematting- Gently put the brush pins on the mat with a tapping movement and tease a few hairs from the mat by pulling the brush towards you and thus removing the pins away from the coat. Repeat until the mat is gone. To prevent mats and tangles, the dog’s coat should be regularly bathed, treated with a conditioner and brushed daily.